Quest® Migration Manager

Version 8.9

Release Notes

October 12, 2012


Contents

Welcome to Migration Manager

New in This Release

Known Issues

Third Party Known Issues

Upgrade and Compatibility

System Requirements

Global Operations

Getting Started

For More Information

 


Welcome to Migration Manager

Quest Migration Manager is a comprehensive solution for seamless simple or extensive Active Directory restructuring and transparent inter-org Exchange migration.

 


New in This Release

Migration Manager for Active Directory

Support for Migration to Microsoft Office 365

Enhancements in Resource Updating Manager

Migration Manager for Exchange

Migrate mailboxes to Microsoft Office 365 with full calendar coexistence during migration

Native New-MoveRequest migration between on-premises organizations

And more...


Known Issues

The following is a list of issues known to exist at the time of Migration Manager release.

General

Feature Known Issue Change Request
General
Migration Manager cannot be installed on a computer where Resource Updating Manager is already installed. Uninstall Resource Updating Manager, then install both applications at once; no project data will be lost. ST78379
The Migration Manager Console cannot be installed on a computer that is in a workgroup. ST70924
The Migration Manager for Active Directory Resource Kit cannot be uninstalled through the main setup suite. ST74509
When you specify a new license instead of the old one, you may get the You are now using N% of your license message, where N is larger than 100. You will stop getting these messages in a certain time, or you can resolve the issue by restarting the Quest Directory Synchronization Agent Configurator Service on the computer where DSA is installed. ST47876

If you uninstall Microsoft Terminal Services Client 6.0, Agent Manager will not work. Re-installing Terminal Services Client does not resolve the issue.

ST44258
Express setup and Open Project Wizard may report the Failed to configure project error if you are running setup on localized (non-English) version of Microsoft Windows. Despite the error text, only Statistics Portal will not be configured. ST36090
Directory Synchronization Agent cannot be installed remotely (from Agent Manager) on Microsoft Windows Server 2008 R2. Consider running DSA installation package locally. ST78786
If you install Quest Migration Manager Statistics on a computer running localized (non-English) version of Microsoft Windows, you will not be able to configure Statistics Portal from the Open project wizard for a project. To workaround the issue, create a local user Everyone on the computer where Quest Migration Manager Statistics is installed before you start configuring Statistics Portal. ST45547
The Quest Migration Manager installation folder path must contain ASCII symbols only. ST63937
If both the Directory Synchronization Agent and the Migration Agent for Exchange are installed on a computer, then uninstalling the Directory Synchronization Agent may cause the Migration Agent for Exchange to work incorrectly. If this happens, reinstall the Migration Agent for Exchange manually. ST83437

Directory Migration and Synchronization

Feature Known Issue Change Request
General
Do not sync computer objects with Directory Synchronization Agents if you later plan to process and move these computers with Resource Updating Manager. Otherwise, Directory Synchronization Agent will delete the target computer object, once it is moved. ST77233
Directory Synchronization Agent does not sync the msExchShadow* attributes. ST77138
Undo cannot be performed for target objects, if migration failed because of the invalid header in import file, but the objects have been created on target. ST77858
Directory Synchronization Agent may stop working if it encounters an object with corrupted required attributes. ST78788
Some complicated intra-forest migration scenarios may require an additional full resync to update group membership after migration. ST78033
If you select a user account and then use the Select by Group Membership functionality to select all groups where the object is a member of, the primary group for that user account will not be selected. ST78225
The Directory Synchronization Agent services stop if the agent cannot access ADAM/ADLDS. ST68969
The Directory Synchronization Agent does not synchronize the Manager can update group membership permission to the target group. The source manager account is granted this permission instead of the target one. ST70542
The Directory Synchronization Agent may need a larger message queuing size limit value than the default value (1GB) on Windows Server 2008 R2 and Windows 7. ST74745
DSA cannot add mail-enabled/mailbox-enabled objects to Hierarchical Address Books in Exchange 2007/2010 organizations that use the Hierarchical Address Book feature. This behavior can be changed by a custom add-in. ST65124
Undo does not restore deleted objects from tombstone if the target domain controller is running Windows 2008 Server. ST64991
Conflicts that are related to msExchMasterAccountSID disappear from statistics even if the conflicts still exist. ST56589
In case of Windows Server 2003/2008/2008 R2 as source and target: Dynamic objects are migrated as static. This is by design. This behavior can be changed by a custom add-in. ST65141
Undo does not work for migrated accounts that have service attributes of a type other than Unicode String. ST56845
DSA may select Windows Server 2008 or later read-only domain controllers to work with, and fails with the LDAP error 0xa. Referral error displayed. To avoid the issue, specify the writable preferred domain controller in the DSA properties. ST51245
Conflict resolution rules with scope equal to forest are verified using the Global Catalog. As a result, this scope type can be used only for attributes published in the Global Catalog. ST19140
You cannot delete a target object using the Synchronize object deletion option, if the object has unsynchronized objects under it. ST64922
Directory Synchronization Agent only supports the SMTP proxy generation in accordance with Exchange 2007 or Exchange 2010 email policy. ST56318
DSA sets invalid HomeMTA attribute, when a new mailbox created on a second or successive clustered mailbox Exchange 2007 server. To learn more about the issue, see the Microsoft Knowledge Base article available at http://support.microsoft.com/kb/928811. ST35734
During the two-way synchronization, source alias may be replaced with the target alias changed by DSA. ST44532
Denied objects within synchronization scope are not placed to Failed objects queue. ST44136
BitLocker and Trusted Platform Module Recovery information backed up in the child object of the AD computer object is lost after migration. ST38557
Antivirus and antispyware software may identify Migration Manager agents and services as malicious software. You may ignore these warnings. ST45347, ST45069
It is recommended to configure recipient policy to convert non-Latin symbols to Latin. Otherwise the non-Latin symbols will be lost. ST46825
Merging mail-enabled objects during the directory synchronization may cause creation of two primary SMTP addresses for the target object, if the target object had different values in primary SMTP address and targetAddress attribute. ST18611
The Directory Synchronization Agent cannot synchronize object deletion for the group that is set as the primary group for any domain user account, computer account or inetOrgPerson. ST15618
A migrated (synchronized) account's primary group might be set to a source group that has not been migrated yet. If so, when target-to-source domain sync is performed by two-way synchronization job, any modification of account’s primary group will not be synchronized until corresponding source group is migrated (synchronized) within the same migration project. This helps to prevent from losses of primary group values in source domain during initial sync. N/A
Trust Migration Wizard does not migrate forest-level trusts. CR151624
An issue may arise if the Directory Synchronization Agent and Domain Migration Wizard simultaneously process passwords and SIDHistory on the same DC. CR165675, CR165732
Although several issues related to the The value provided for the new password does not meet the length, complexity, or history requirement of the domain error were resolved, you may still get this error message in the following situations:
  • If the source password is empty, while the minimum password length on the target is set to more than 0 characters.
  • If the source password was previously migrated to the target and is stored in password history of the target account.
N/A
If you merge migrated user accounts with existing target ones and later undo the action, the original passwords of target accounts are not restored. Restoration of all other attributes is not affected. N/A
When merging accounts, the migration sessions compare source and target password ages even if the Set password to option is selected. To avoid possible inconsistencies in setting passwords during the migration, you can turn off modification time check. To do this, you need to run Registry Editor, browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AeActivation_[COMPUTER_NAME]\Config\PwdSwitch, create the CheckConflicts string value, and set it to 0. N/A
During the Undo operation, the proxyAddresses and userPrincipalName attribute values are not checked for uniqueness on the source and target. N/A
If objects that have already been migrated are included in another synchronization job, the migration admin who migrated these objects will no longer be able to undo their migration. N/A
Intra-forest migration: If after migration with the Reconnect Exchange Mailbox option selected, a new mailbox was created for the source user, then an undo operation for the migrated user will merge proxyAddresses. N/A
Undo will not be performed for a migrated object if that object was created on target during migration and has child-objects that are not undone yet. N/A
In some cases the OUs created during migration in the target domain may not be deleted during undo. N/A
In case of Windows 2003/2008 as a target: Undo cannot restore a deleted security domain local group from its tombstone. N/A
If a new user is created using an existing user as a template, its extensionAttribute15, which contains information about matching, is copied from the template as well. If the directory synchronization is running, this will result in incorrect object matching. The workaround is to clean the extensionAttribute15 for the incorrectly matched user. N/A
Intra-forest migration: If the target domain is running in mixed mode and the option “Add source membership to corresponding target account” is enabled during migration, target security global groups lose links to source contact objects. N/A
During migration: The Directory Synchronization Agent cannot migrate OUs with the property ShowInAdvancedViewOnly set to TRUE and if these OUs are migrated with hierarchy. The following errors may appear in migration log: Error 0xe30000a4. Object: [object_name] was not created on target. Its parent has probably been deleted after migration. N/A
If an object has been moved out of synchronization scope and then some its properties are modified, these changes will not be synchronized by the Directory Synchronization Agent after that object is returned to the synchronization scope. Full resynchronization is needed for these changes to be applied. N/A
Links are not resolved if a session is run in Test mode. This is by design. Links will be resolved after a session is run in normal mode and they will disappear from Statistics. N/A
Even if the creator of a domain pair or task has been revoked the Full Admin role in Delegation Wizard, he or she is still Full Admin for that domain pair or task. The workaround is to delete the domain pair or task to revoke Full Admin rights. N/A
If the second installation of the Directory Synchronization Agent is started from Agent Manager until the previous installation is completed, the Unspecified error occurs. Migration Manager does not support parallel Directory Synchronization Agent installations. N/A
If during migration there were not enough permissions to modify some attributes of the target object, but the object was successfully created, the undo operation will not be available for such objects. The workaround is to skip the attributes to which you do not have enough rights during migration. N/A
If the Directory Synchronization Agent was uninstalled, you cannot undo the migration sessions performed by that agent. The following error occurs: Undo session failed. Cannot find file C:\Program Files\Quest Software\Migration Manager\DSA\CONFIGS\UndoStorage\[GUID].stg. For more information, refer to Quest Knowledge Base article available at https://support.quest.com/SUPPORT/index?page=solution&id=SOL43015. N/A
Intra-forest migration: If during the Mail Box Reconnect or Undo Mail Box Reconnect operation a user logs on to the mailbox with source account, he or she may not be able to logon to the mailbox with target account after the operation is completed. The workaround is to wait until Exchange replication is completed or try to refresh Exchange cache (for example, by restarting the information store). N/A
If at least one object in source domain is modified often (for example, twice a minute), the Directory Synchronization status will not be switched from the Initial synchronization to the Delta synchronization. In this case, the agent will never be switched to the sleeping mode as well. N/A
The following attributes should not be skipped from directory synchronization: DSA service attributes (extensionAttribute15, extensionAttribute14, adminDescription, AdminDisplayName), objectClass, objectGUID, userAccountControl, objectCategory, objectSID, msExchMasterAccountSid, msExchMailboxSecurityDescriptor. Otherwise, you may experience problems during directory synchronization. N/A
Attribute 'name' should be used to skip instead of skipping the following attributes: distinguishedName, cn, ou. N/A
If name attribute is skipped, the objects will not be created on target. N/A
If the Discretionary Access Control List (DACL) of the source user mailbox contains only one Access Control Entry (ACE) with the Associated External Account permission, the Everyone Full Control permission will be set for the target user mailbox during the Reconnect Exchange mailbox operation if the account is enabled during migration. N/A
If the value of the source object's attribute selected to store matching information is not empty, during migration, if no object can be found in target directory according to information written in the matching attribute, such object will not be migrated. The following error occurs: Source object X that should be matched by the following high priority rule: objectGUID=Y is matched by the following low priority rule: objectClass=user with the target object Z. The workaround is to clean the matching attribute of the source object. N/A
If the contacts - members of the source group are migrated to target domain A and the group is migrated to target domain B, the target group will not have migrated contacts as members. N/A
If after starting the synchronization job, before the start operation progress has reached 100% you press Start again, the job status will not be changed to Started and Stop will not be available. The workaround is to wait until the start operation progress has reached 100% and press Start again. This will re-start the synchronization job normally. N/A
When migrating a small number of objects the links may not be resolved due to the replication latency if the target domain controller is not a Global Catalog. The workaround is to re-migrate the objects. N/A
When you make not critical changes to a stopped synchronization job that do not require full resynchronization, such as modifying the Exclude list, these changes may be accepted as critical. The following message may appear: The changes you have made require full resynchronization of the directories. If you keep the settings delta syncs will not be available. The Start option after that becomes unavailable. N/A
After critical changes were made to a stopped synchronization job that requires full re-synchronization, such as adding a conflict resolution rule, the following message appears: The changes you have made require full resynchronization of the directories. If you keep the settings delta syncs will not be available, but the Start option may still be available. N/A
Migration and synchronization: if the object has unresolved links from several linked attributes, unresolved links from only one of these attributes will be displayed in the Unresolved links/ Unresolved objects report. Additionally, if this attribute is multivalue, not more than 100 unresolved links will be displayed. ST46638
When migrating hierarchy if there is an OU in the target domain with the same name as the source OU selected for migration, the attempt to create the OU with such name in the target domain will fail. The error will appear in both the Failed and Conflicts queue. N/A
When undoing a session that was made with the Merge option, the undo completes successfully. However the following errors may appear in the log: Target object CN=... modification failed. LDAP error 0x41. Object Class Violation (00002014: UpdErr: DSID-031A0F8A, problem 6002 (OBJ_CLASS_VIOLATION), data 0). Cannot modify attributes. You can ignore these errors. N/A
When creating a report for the migration session the following error may appear: UnknownError: 'name' is a duplicate attribute name. Line x, position y.; :. The empty xml files may be generated. N/A

If after a migration a two-way synchronization was set, the service attribute values may not be applied to the source objects. The following messages appear in the log: Target JobID:1 <- FeedBack Handler gave preference to the Target on attribute: extensionAttribute15 ", Target JobID:1 <- FeedBack Handler gave preference to the Target on attribute: extensionAttribute14.

N/A
If the suite launcher was used to install Migration Manager and the first Directory Synchronization Agent, when you install the other Directory Synchronization Agents manually, the ADAM port number and other information is requested but not detected automatically. N/A
The Add prefix/Add suffix fields in the New Conflict Resolution Rule dialog show values for the previously set rules (not cleared). The workaround is to clear them manually when creating a new conflict resolution rule. N/A
If an object in the source domain is moved into the synchronization scope and a matching object is found in the target domain, then only service attribute values of the object will be applied in the target domain. The values of other attributes will be applied only if they are changed for the source object after synchronization. N/A
If target domain controller running Windows Server 2008 or later is configured with default firewall settings, you cannot migrate passwords and SIDHistory, Active Directory Processing Wizard cannot cleanup SIDHistory, and Undo Wizard behaves incorrectly. ST51469
If domain controller is running Windows Server 2008 or later, and you need to restart the Active Directory service, you should first stop all synchronization jobs and migration jobs working with this DC. You must also make sure the Active Directory Processing Wizard is not cleaning up SIDHistory using this DC. ST49498
When the Undo Wizard tries to remove delete-protected objects, the objects are not deleted, but no error messages are displayed ST49503
During one-way synchronization target primary SMTP address is copied to source. ST62878
Migration to Microsoft Office 365
During a second migration or any subsequent migration of groups, members deleted from the source groups are not deleted from the target groups. This is because group membership and other linked attributes (attributes that contain links to objects) are always merged with the target values during migration with "Resolve" rules. If you want to overwrite the values instead of merging them, you should first perform a migration with a "Clear" rule and then another migration with a "Resolve" rule. ST81332,
ST83209,
ST83265
When installing the Directory Migration Agent, Migration Manager does not check that the computer meets the agent system requirements. If the computer does not meet them, the agent is installed anyway and will not work afterwards. ST81875
Active Directory to Office 365 migration does not support Active Directory dynamic groups. ST82034
During Active Directory to Office 365 migration, room and equipment mailboxes are treated as regular user mailboxes, and the resulting target mailboxes do not have the full set of features they had in the source environment. Such mailboxes need to be reconfigured manually after the migration, as described in the Migrating to Office 365 document. ST82123
If you uninstall an instance of Directory Migration Agent that you used for a collection, then configuration actions such as creating tasks or initiating coexistence may produce cryptic "Unspecified error" messages in the Migration Manager for Active Directory (Microsoft Office 365) console. If this happens, change the agent for the affected collections or reinstall the agent on the same computer. ST82152
If you restart an instance of Directory Migration Agent while the Migration Manager for Active Directory (Microsoft Office 365) console is open, then automatic object status updates will stop, and you will need to click Refresh every time you want to update the status. If this happens, restart the console. ST82568
When you migrate groups from Active Directory to Office 365, the group naming policy is ignored during email address assignment. For example, a group may be supposed to get the email address starting with DL_<group_name> according to the policy, but instead it gets the address starting with <group name>. ST82845
If you migrate a contact that had no email address in the source environment, then its migration fails with the following error: "Migration of contact failed. Error 0x80131500". Migration Manager can migrate contacts only if they have email addresses. ST82538
If you migrate an object and then perform the Break Matching action on the pair that the object is in, you will not be able to roll back the migration for that pair any more. ST81472
If you migrate an object from Windows Server 2008 R2 Active Directory and then delete the matching source object, the object is moved to the recycle bin, and attempts to roll back the migration of this object will fail. ST81768
Rollback does not restore some attributes (for example, ntSecurityDescriptor) of source objects to their precise original state. ST82177
Rollback does not restore the membership of source or target groups if any source or target group members were removed after the migration but before the rollback. ST82498,
ST81614
Rollback does not restore the old name of the source object if the matching target object was renamed (that is, had its name attribute changed) after the migration but before the rollback. ST82462
If an object is supposed to restore its old display name during rollback, the name is changed successfully, but the Migration Manager for Active Directory (Microsoft Office 365) console keeps showing the previous name. During subsequent migration, the information in the console becomes up to date. ST83148
Rollback does not restore group membership for those group members that are in a different domain. ST82036
Rollback may fail if the source object's msExchMailboxSecurityDescriptor attribute was changed after the migration but before the rollback. ST82177

Resource Processing

Feature Known Issue Change Request
General
A Rename task will report successful execution if you specify to rename a computer that is not in the target collection. In fact, nothing will be done with that computer. ST78383
Resource Updating Manager cannot move computers from workgroups to domains. ST78882
Processing progress dialog includes installed drivers into the Services counter, so the total number of services will be different from the number displayed by the Services snap-in on target computer. ST78668
A single computer can be added to a collection in Resource Updating Manager under different names (for example, FQDN and NetBIOS). For such computers, tasks can be applied incorrectly. ST78863
When you add computers to a collection in Resource Updating Manager, IPv6 addresses are not supported. ST75293
Target users' Write permissions on files and Registry may be replaced by the source users' Read permissions when the Leave source accounts' permissions option is selected during resource processing. ST68671
When a RUM Controller installed on Microsoft Windows 7 processes dozens of computers simultaneously, you may get the following error for some of the processed computers: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. ST74465
A source computer account cannot be deleted during a move opperation by using the target administrative account with administrative permissions in the source domain. ST68261
You may get a license expiration warning while installing Active Directory Processing Wizard on Microsoft Windows 7, Microsoft Windows 2008, or Microsoft Windows 2008 R2. ST72725
Only one instance of the Resource Updating Manager console can run on a computer at a time. ST71965
After a collection has been created in Resource Updating Manager, you cannot edit its description. ST71948
The Resource Updating Manager Agent crashes if the computer runs out of disk space. ST74463
Some of the RUM agents may fail to report to RUM controller about task completion when several RUM Agents are processing resources simultaneously. ST74383
When viewing a collection processed on a remote RUM console, the View Logs shortcut menu command fails to find the log files on the remote console. This happens because logs are stored on the console which processed the collection. ST74374, ST72225
Security settings of server links on SQL 2008 R2 servers cannot be updated by SQL Processing Wizard. ST74353
Resource Updating Manager does not notify users when trying to move a node of the Exchange cluster server or Exchange Virtual Server. ST63874
Moving computers running Windows NT4 between domains using Resource Updating Manager console is no longer supported. However such computers still can be moved between domains using legacy Resource Updating Manager console. ST63767
Resource Updating Manager cannot perform remote processing of scheduled tasks on computers running Windows Vista or higher. These scheduled tasks can be processed remotely on these computers from another computer running Windows Vista or higher using vmover.exe as described in Quest Migration Manager for Active Directory User Guide. ST63596
Resource Updating Manager cannot process permissions set for shared libraries (homegroup specific shared resources) on computers running Windows 7 and Windows Server 2008 R2. ST62993
On computers running Windows Vista or higher Resource Updating Manager processes scheduled tasks located under the Task Scheduler Library root folder only. ST62552
Active Directory Processing Wizard: Other Exchange Permissions processing can reassign Exchange Full Administrator and Exchange Administrator roles to user or group incompletely. This user or group must be added to Exchange server Local Administrators group manually after processing. ST52707
If the target DC is running Windows Server 2008 or later, you should modify the target DC's firewall settings (as described in the product documentation) to perform SIDHistory cleanup. ST52537
When moving computers between domains, Resource Updating Manager cannot add additional accounts to local Administrators group, if no trusts are established between these accounts’ domain and domain where Migration Manager console is installed. ST62786
Stored credentials, Execute As properties, linked servers and accounts under which the SQL Server Agent jobs are started are not updated on SQL Server 2005. ST22458
The SQL Processing Wizard Undo feature does not work for SQL Server 2005 if the account were migrated using SIDHistory and the SQL server is in the target domain. ST21379
In case of migration without trusts permissions in SQL Server 2005 must be updated after the server running SQL Server 2005 is moved to the target domain. ST21382
If a user is migrated to two different target domains within one migration project the SQL Processing Wizard will update permissions only for one of the target accounts. N/A
Resource Updating Manager does not process Windows Vista scheduled tasks created by another user, if the Run whether user is logged on or not checkbox is selected. ST42431
If the Run whether user is logged on or not checkbox is selected for a Windows Vista scheduled task, Resource Updating Manager will not process the task. To workaround the issue, use the Set Credentials command. ST42357
Resource Updating Manager does not support processing of permissions assigned for print servers. ST62574
Active Directory Processing Wizard: in case of inter-forest migration group membership updating for universal groups may generate a warning "foreign link with SID: , GUID: cannot be applied". This message can be safely ignored. ST52837
ACE primary group field is not processed by Active Directory Processing Wizard. ST53784
Error counter may show zero number of errors, although errors are displayed in the log file of Active Directory Processing Wizard. ST52537
Resource Updating Manager cannot execute interactive scripts. ST63923
Active Directory Processing Wizard may select read-only Windows Server 2008 or later domain controllers to work with, and fails with the LDAP error 0xa. Referral error displayed. To avoid the issue, specify writable preferred domain controller in the processing options. ST52661
You may get an error in Migration Manager Console when trying to stop a processing task that is not running at the moment. This error message should be ignored. ST78964
Exchange Processing Wizard: When SIDs that cannot be resolved are being applied, security descriptors will not be correctly updated. You will get warning messages in Exchange System Manager when you try to view the security information of an object with such a security descriptor; however, the permissions will work correctly. N/A
SMS Processing Wizard, SQL Processing Wizard, and Active Directory Processing Wizard: A Resource Admin can change the direction of processing. N/A
SMS Processing Wizard: The wizard cannot update the SMS server on the local machine if you specify credentials to connect. N/A
Trust Migration Wizard: If the source domain has a realm trust established, the wizard cannot migrate such trusts from that source domain. N/A
Trust Migration Wizard: The wizard cannot migrate trusts if the DNS domain name is specified. N/A
SMS Processing Wizard and SMS 2003: If a migrated user has the Instance security right granted to a Report or a Software metering rule in SMS, the permissions will not be processed for that user. N/A
Active Directory Processing Wizard: The msExchMasterAccountSid attribute may not be processed correctly if the DNS names of the source and target domain cannot be resolved. N/A
SQL Processing Wizard: The wizard cannot process the SQL server used to store the Migration Manager for Exchange configuration database. N/A
Exchange Processing Wizard: If the mailbox contains a large number of messages (more than 10000), the wizard may stop processing the mailbox due to the timeout period. N/A
Exchange Processing Wizard and Microsoft Exchange Servers 2000 with SP1 and SP2: Client permissions set to subfolders (such as Calendar and Inbox) in a mailbox are not processed. N/A
Exchange Processing Wizard: When messages in public folders are processed, the read/unread status of the messages is lost. All messages will be marked as unread after processing. N/A
Exchange Processing Wizard: Messages posted using Outlook Web Access by users without mailbox are not processed. N/A
Exchange Processing Wizard: Cannot process a mailbox that has been moved to another store and that has not been logged on to by a user yet. The Unauthorized (401) error occurs. N/A
Exchange Processing Wizard: Cannot process mailbox folders whose names contain unsupported symbols (such as the following: < / > \ '). N/A
Exchange Processing Wizard: The wizard may fail to process mailbox permissions if a locale other than English is installed on the Migration Manager console. N/A
Exchange Processing Wizard and Microsoft Exchange Server 2003: Not all messages may be processed in the additional mailbox folder, if the number of messages in the folder is big. This is due to the limitation on the number of objects that can be opened in one MAPI session. The limit can be changed by editing the key in system registry of the Exchange server. For more information, refer to Microsoft Knowledge Base article: http://support.microsoft.com/?kbid=830829. N/A
If Domain Migration Wizard and Quest Migration Manager are both installed on one computer, after the Quest Migration Manager is uninstalled, the Exchange Processing Wizard that is part of the Domain Migration Wizard does not work any longer N/A
Resource Updating Manager is unable to process IIS remotely, if the Resource Updating Manager console and IIS Manager for Remote Administration are both installed on one computer running Windows Server 2003. In that case the "Interface not registered" error message will be written to log each time you try to process IIS remotely. ST80254
SharePoint Processing
SharePoint Processing Wizard will not operate correctly when installed on a SharePoint server with previously installed Migration Manager or Resource Updating Manager. ST78984
SharePoint permissions cannot be merged. If a target account already has permissions on a SharePoint server before you run the wizard, the source account’s permissions may be overwritten by the target permissions. ST43164
Accounts listed on the Shared Services Administration page are not processed. ST42976
The SharePoint Administrator Group Account in Microsoft SharePoint 2003 is not processed. ST47968
Active Directory groups are not processed. ST42464

Exchange Data Migration

Feature Known Issue Change Request
General
To perform correct migration, the Quest Migration Attendant for Exchange service must be started on each Agent Host associated with the Exchange Server 2010 computers. Otherwise, Mailbox and Calendar Synchronization agents cannot create mailboxes on the Exchange 2010. ST65155
If the mailbox message body contains links to corrupted attachments, the mapi_e_corrupt_data error is written to the log file and this mailbox may not be switched. N/A
Single-instance messages are migrated as normal messages. N/A
All Exchange 200x servers must support all languages that are used in the source or target mailboxes or public folders. N/A
Migration Manager agents may not work correctly if mailbox messages, folders, or properties are modified by the user while the agent is processing the mailbox. N/A
If the account used to install Migration Manager agents does not have administrative rights on the remote server, the agent components may not be correctly registered. This will cause agent processes to hang on the server. N/A
If the legacyExchangeDN attribute contains both the '@' character and the decimal point, Quest Migration Manager may fail to process or switch such mailboxes. Customers experiencing the issue should contact Quest Support. N/A
Outlook 2007 SP1/SP2 may switch profiles to target mailboxes preliminary using autodiscovery service instead of EMWProf utility. Refer to solution 51188 for detailed description and possible workarounds. ST61332
The appropriate password length for any service account is limited to 57 characters. Avoid using service accounts with passwords longer than that value. TF215458
If the Migration Manager console and the Migration Manager for Exchange Resource Kit are installed in different locations, the Resource Kit node in the console management tree will be empty. TF213341
Hotfixes
The Job Installation Wizard will not install the Shared Components hotfix, if the Shared Components were installed before and the synchronization job has been set up. Use the Hotfix Installation Wizard instead. N/A
Clusters
The agents cannot process mailboxes if Virtual Exchange that holds the public folder store is down. N/A
Migration Manager for Exchange Console
The Mailbox Properties dialog is not displayed, if Associated Domain Controller of the user’s Home Exchange server is not in the same domain, as the user. ST36077
If an object’s distinguished name is longer than 450 characters, the object will not be displayed in Migration Manager and an error message will be displayed when adding or refreshing a server that hosts the object. This is because the SQL Server allows no more than 450 symbols for an indexed field. N/A
There might be resource leaks if Migration Manager is started on a remote server via terminal session. N/A
A mailbox with a Display Name value of more than 100 symbols cannot be specified as the Administrator Mailbox. N/A
If the mailbox switch was done and undone several times manually, both source and target mailboxes may contain some duplicated messages. N/A
Migration Manager supports Unicode character sets (for example, the Japanese character set) if the language locale that contains the corresponding character set is installed on the console and set as default. N/A
If you change the password for an account used by Migration Manager agents, Migration Manager will not generate an error as expected but will continuously try to start the agents. N/A
If several Migration Manager consoles are using the same SQL database, it is recommended to refresh SQL after any action (such as deleting a job, deleting a collection, or committing changes) has been performed on the synchronization jobs. To refresh the SQL server, right-click the root node ‘Exchange Migration Project’ and select the Refresh command from the shortcut menu. N/A
For the entire Exchange organization, you can set up only one public folder job having the ‘All Public Folders’ folder as a synchronization root. N/A
The public folders with a backslash (\) character in the folder name are not displayed in the console. You cannot select such folders as synchronization roots and exclude from synchronization. N/A
After a hotfix installation, the agents installed on a cluster server are not started automatically and should be started manually. N/A
A hotfix should be installed on all Virtual Exchange Servers running on a cluster before starting the agents. N/A
The path to Aelita Shared folder is saved in the agent's configuration file. When a Virtual Exchange Server is moved to another cluster node and shared components on that node are installed on a different drive, the path to Aelita Shared folder will be invalid and the agent will not work. N/A
If the server hosting the Calendar or Free/Busy Synchronization Agent cannot be found in the configuration database while applying the default settings to the agents, no settings will be applied to any agent. Do not select the options to apply settings to Calendar and Free/Busy agents if the servers hosting these agents are not present in the database. N/A
Statistics Collection Agent
The Statistics Collection Agent cleans up statistics SQL tables only for the Migration Manager agents enabled for statistics collection. ST35950
The Migration Manager console displays statistics with a slight delay. N/A
Migration Manager Statistics supports only SQL authentication. It does not support Windows authentication. N/A
An object already synchronized within one synchronization collection and then processed within another collection will be displayed twice in the Migration Manager Statistics reports. N/A
If the target administrative group is selected for free/busy synchronization, but the ‘Search for new free/busy messages in the target organization’ check box is not selected (that is, the existing target free/busy messages will be synchronized, but the new target free/busy messages will not be created in the source administrative group), then the ‘Matched’ field value for this administrative group will be displayed as “0” in the Migration Manager Statistics reports. N/A
The Statistics Collection Agent does not collect statistics data from the agent hosts where it is installed. Therefore, you should install the Statistics Collection Agent only on those agent hosts that you do not need statistics data from. N/A
If Windows authentication is used by the Migration Manager console computer, the account under which the Statistics Collection Agent is running should have appropriate permissions for SQL server. N/A
If a mailbox was processed within a Remote Users collection, the Migration Manager Statistics reports will show its LegacyExchangeDN instead of its Display Name in the ‘Display Name’ field. N/A
If a mailbox was processed within a regular collection, the Migration Manager Statistics reports may show its LegacyExchangeDN instead of its Display Name in the ‘Display Name’ field. N/A
Any public folders once processed within the public folder collection and then excluded from synchronization will not be excluded from the Migration Manager Statistics reports. N/A
When the synchronization is in progress the target server counter values may exceed the source server counter values. N/A
If the total size of the folder messages is less than 1 KB, in the Migration Manager Statistics reports the total size of the folder will be displayed as 0. N/A
If the ‘Copy only messages not older than’ check box is selected in the Mail Source Agent Properties and the Public Folder Source Agent Properties, Migration Manager Statistics will calculate the percentage of synchronized messages as the relation of number of copied messages to the total number of messages. It may seem that not all messages were synchronized. However, actually only messages not older than the specified number of days were synchronized and the task has been completed correctly. N/A
If the Statistics Collection Agent and any Migration Manager agent are working simultaneously in the same folder, the Statistics Collection Agent will log the following error: Error -2147217900 [Microsoft][ODBC SQL Server Driver][SQL Server]INSERT statement conflicted with COLUMN FOREIGN KEY constraint 'FK_STATProcessedWorkflow3_STATProcessedSession3'. As a result, the Statistics Collection Agent will not collect statistics data during the session in which the error is logged. The statistics data will be collected during the next session. N/A
For mailboxes added to a mailbox collection implicitly (for example, via a distribution list), the Refresh Switch Status operation from the console will not update information about the switch status in the statistics database. Therefore, information about the switch status displayed in Project Manager and Statistics portal may differ until the Statistics Collection Agent updates the statistics database. N/A
Changing agent host account in properties of an agent host does not affect Statistics Collection Agent (SCA). To change agent host account for SCA, use properties of the Statistics node in the management tree. TF216441
Mailbox, Calendar and Public Folder Synchronization
General
If you change the value of the Copy message not older than option in the properties of any type of synchronization agent, the new value is applied only after the agent is restarted. In addition, if the new value is greater than the old value, you need to perform full resynchronization. If the new value is less, then resynchronization is not needed. ST79413
If the Mail Target Agent process PST files for a certain mailbox within the lost collection, the status of the corresponding Move Mailbox request will be checked at every migration session in spite of other settings. ST68326
If the Move Mailbox operation is failed, the Mail Target Agent (MTA) will process the corresponding PST files at every migration session. ST68272
The Mail Target Agent does not support move mailbox operation from Exchange Server 2010 to Exchange Server 2003 or Exchange Server 2007 within the target organization. ST68425
An agent is unable to resolve the mailboxes if the locale on the Alt Host and on the Exchange server are different. ST68213
Shortcuts in attached messages may not work after the migration. ST47705 
The agents do not write statistics, if the Do not clear the agent's statistics option is enabled.  Also, you may get the CAgentStat::ReleaseSessionEx InternalError 91 Object variable or With block variable not set error in any agent log. To workaround the issue, specify a long period of time (a year, for example) in the Keep statistics for the last: ... days option. ST47850
If the recipient table of a message contains contacts with double-byte characters, Aliases of these contacts will be shown instead of display names. ST41020
A license may be consumed twice for the same mailbox in the following cases:
  • If you move the mailbox in the source environment between servers.
  • If the mailbox is hosted by an Exchange 2000 or 2003 clustered server and a failover operation occurred during migration.
  • If the mailbox was processed by several Mail Source Agents (MSA) installed on different servers, used as agent hosts for the source Exchange server.
ST47164,
ST61222
Migration Manager does not support Exchange servers where Microsoft Outlook is installed. For more information, see the Microsoft KB article available at http://support.microsoft.com/kb/266418. N/A
If the Administrator mailbox specified for the public folder synchronization job is changed during the course of synchronization, the public folder synchronization agents will not work properly. N/A
The Administrator mailboxes specified for the public folder synchronization jobs should not be added to the collection processed by the mail synchronization agents. N/A
Localized symbols in the folder names created via Outlook Web Access will not be correctly copied to the target servers. N/A
Migration Manager agents will fail to work with a PST file if the full path to the file is longer than 255 symbols (including the file name). For example, the source agents might fail to create these files, and the target agents might fail to extract data from the PST files. N/A
Exchange migration can be started only after the mailbox-enabled target users have been created on the target server. That is, the target Global Address List should contain the valid objects by the time Exchange migration is started. N/A
Exchange 2003 Query-Based Distribution Groups and Exchange 2007/2010 Dynamic Distribution Groups cannot be processed within mailbox and calendar collections. N/A
If a Windows NT account has been migrated to the target domain with SIDHistory preserved, and this user logs on to the source mailbox using SIDHistory and creates a message in the source mailbox, the user’s rights for this message will be lost in both the source mailbox (before switch) and the target mailbox (after switch). N/A
If some messages became conflicting as a result of simultaneous message modification in the same public information store by two users, these conflicting messages may be not copied to the target server, the Public Folder Source Agent, or the Mail Source Agent logging the MAPI_E_CORRUPT_DATA error. N/A
Message and folder deletions will always prevail over other modifications. For example, even if the messages or folders corresponding to the deleted source messages or folders have been modified, they will be deleted by the agents. N/A
If during the time interval after the target mailbox recreation (performed with the mailboxes of the Remote Users Collections) and before the source mailbox content copying the MAPI logon occurs, the default mailbox folders will be duplicated. N/A
If the Hide membership Exchange task was performed on a group and that group is added to a mailbox or calendar collection, none of these group members will be synchronized within the collection. The members of groups having the ’Hide group from Exchange Address Lists' check box selected will not be processed either. N/A
Quest Migration Manager Switch Notification does not support Unicode format in the From and Subject fields. N/A
Mailboxes having a LegacyExchangeDN that exceeds 255 symbols cannot be processed. N/A
If a message attachment is corrupted the message may be not copied to the target server or a message may be copied without attachment. If one of several attachments is corrupted, the mail agent will log an error, though the message will be copied along with all valid attachments. N/A
If nesting of folders exceeds 49 levels, the permissions for the 50th and later nested folders will not be synchronized. N/A
The following properties of the target mailbox will contain the source mailbox Display Name:
  • PR_ACCOUNT_NAME
  • PR_ORIGINAL_SENDER_NAME
  • PR_ORIGINAL_SENT_REPRESENTING_NAME
  • PR_ORIGINAL_DISPLAY_TO
  • PR_ORIGINAL_DISPLAY_CC
N/A
The following properties will not be synchronized by the agents:
  • The 'Any form' selected in the 'Allow these forms in this folder' group of public folder Properties dialog box
  • The 'Drag/Drop posting is a' property specified in the Administration tab of the public folder Properties dialog box
  • The 'Initial view on folder' property specified in the Administration tab of the public folder Properties dialog box
  • The 'Save sent message to' property specified in the Delivery options group of the message Options dialog box
N/A
If a synchronization root folder is specified as a ‘Folder’ in the ‘Folder groups’ of the Activities tab of the folder properties it will not appear in the target folder Properties dialog box. N/A
The agents working on Exchange 200x server may hang up if the DC associated with this server becomes unavailable. N/A
If a mailbox is hidden from the Global Address List, the Migration Manager agents will not synchronize this mailbox (including Calendar folder and free/busy message) and permissions granted to this mailbox. N/A
The Mail and Calendar Agents cannot log on to a mailbox if the name of the information store that homes the mailbox contains any of the following characters: # + < > " , N/A
If Access Control List of a source folder is full, you get the MAPI_E_TOO_BIG error and the subfolders are not migrated. The issue applies to Mail Target Agent and Public Folder Target Agent. ST32485
PST files with size exceeding the PST file contents size limit value may still be migrated, since Migration Manager checks the currently processed file size only after each 500 items. ST36497
Calendar Synchronization Agent, Mail Source Agent and Free/Busy Synchronization Agent may fail to logon the mailbox on remote server, if the LmCompatibilityLevel parameter in the remote Exchange organization is set to 5.  The MAPI_E_FAILONEPROVIDER or MAPI_E_LOGON_FAILED error messages may appear in the log file. For more information about the LmCompatibilityLevel parameter, see the article available at http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/regentry/76052.mspx. ST51594
If the Mail Source Agent fails to expand group members when processing Exchange 2007 SCC server, then you should check whether the homeMTA attribute for Microsoft System Attendant mailbox matches the homeMTA attribute of the mailbox of this Clustered Mailbox Server.  This also applies to the Calendar Synchronization Agent. ST58900
The Mail Target Agent and Public Folder Target Agent process the PRV (PUB) files in ascending order in accordance with the date modified parameter. When clocks are adjusted for autumn daylight saving change, then files created during 1 hour after adjustment may be processed the incorrect order, because files order by the date modified parameter does not match the actual order by files creation.
It is not recommended to perform initial synchronization during this time period.
ST63436
Sometimes a target mailbox needs to be deleted and recreated as part of the synchronization process. In such cases, the mailbox recreation may not occur during the next session, but may be delayed until the session after it. ST65107
The Mail Source Agent, Calendar Synchronization Agent and Migration Agent for Exchange are able to process only universal groups and therefore do not process global or domain local groups. TF218525
Room mailboxes synchronized by Migration Manager for Exchange agents do not accept meeting requests automatically in the target organization. Therefore, you need to configure room mailboxes manually so that they can accept meeting requests automatically. TF208203
If a global catalog (GC) is installed on a domain controller (DC) then Mail Source Agent and Calendar Synchronization Agent will connect directly to GC and therefore LDAP filter will be applied onto objects from GC. Keep it in mind when configuring LDAP search filter because not all Active Directory attributes are presented in GC. TF213806,
TF208265
Mailbox synchronization may fail if Migration Agent for Exchange cannot obtain the license. Here are two possible reasons for this error:
  • There are no unused licenses available.
  • The Net use connection option is not selected in the project options for the agents that are installed remotely.
You should resynchronize this mailbox after the license issue is resolved.
TF226878
When Microsoft Lync is used in the target domain, the conversation history is saved only to the target mailbox, no matter whether the user is connected to the source or target mailbox. TF228213
Mailbox Synchronization
After a mailbox move operation or the creation of a new Exchange 2010 mailbox during the migration process, the mailbox does not immediately become available for login. The Mail Target Agent will record login errors until the mailbox is ready (this can take up to 20 minutes). In these situations, login errors can be safely ignored. ST68155
The Mail Source Agent switch may fail after encountering a corrupted message. To workaround the issue, set the Switch a mailbox if not more than <...> errors occurred during migration option value to more than 0. ST28063, ST30978
If a mailbox is processed by the agents in a job, and then you add the mailbox to another job with a different target server, Mail Target Agent may experience the following error when logging in to the mailbox: Your profile is not configured. - MAPI_E_UNCONFIGURED. The issue is resolved automatically after several unsuccessful logon attempts. ST32937
The agent may fail to create the Schedule folder on the target server with the MAPI_E_NO_SUPPORT error. This may be caused by excessive size of the 0x61AF0102 property value. If you encounter this issue, contact Quest Support. ST33194
Mail agents may not work correctly if the target Exchange 200x mailbox is modified before the mailbox switch. N/A
Migration Manager agents do not update some links in copied messages, tasks, notes, and calendar and journal entries. N/A
A mailbox will be switched even if there are conflicting appointment items that were processed but not synchronized by the Calendar Synchronization Agent due to the conflicts. The mail agents will consider such appointments to be in sync. N/A
The Mail Target Agent cannot find a mailbox during a period of time right after the mailbox is moved to another mailbox store. This is how Exchange 200x works. N/A
If the source mailbox Draft folder contains non-dated messages, the corresponding target messages will all have the same date of target message creation. N/A
During mailbox synchronization, if the size limit for the target mailbox is reached, the mailbox is incorrectly marked as switched. The workaround is to set the target mailbox size limit not less than the size limit of the source mailbox or set it after migration is completed. N/A
The Mail Source Agent cannot detect whether items in the Deleted folder were removed using Microsoft Outlook Web Access. This is an issue with Outlook Web Access. N/A
If the Switch mailboxes and preserve offline folder (OST) files option is enabled for a mailbox synchronization collection, then the target Exchange organization’s Transport Limits option is ignored. This means that messages are successfully moved to the target mailboxes even if the message sizes exceed the organization-wide limit. TF226679
Public Folder Synchronization
Migration of public folder moderators is not supported for Exchange 2010 Server. ST67605
Migration of public folder rules is not supported for Exchange 2010 Server. ST67591
Folder hierarchy synchronization may fail, if more than 40 rules are assigned to one of the folders and folder size exceeds 100KB. ST31421
The Internet News Groups folders may be not synchronized or synchronized with errors. N/A
The use of the ‘Aelita EMW Recycle Bin’ folder is strongly recommended in order that no public folders deleted accidentally are lost during synchronization. It is recommended that the network administrator manually create the 'Aelita EMW Recycle Bin' folder and replicate it to all the organization servers involved in the public folder synchronization. The agents automatically create this folder, but it is not replicated to other servers. N/A
The Exchange account under which the Public Folder Synchronization agents are running should be mail-enabled and have a mailbox in the same Exchange 200x organization. N/A
The read/unread status of public folder messages will not be synchronized. N/A
A user can customize views for any public folder. The information about user-defined views is stored in the mailbox and is not synchronized by the Migration Manager agents. The user will have to configure the views for each public folder again after mailbox switch. N/A
Conflict messages may be created if the public folders synchronized by Migration Manager agents are replicated between servers. N/A
If a source public folder has a rule to forward messages to a user, the user will not be able to reply to the messages forwarded from the folder after the mailbox switch. N/A
Some of public folders directory and admin attributes, such as the folder size limit, are not synchronized. N/A
The ‘Issue warning at (KB)’ and ‘Age limit for replicas (days)’ properties specified in the Limits tab of the public folder Properties dialog box will not be synchronized. N/A
Suppose messages are deleted from a source public folder and the corresponding messages on the target folder are moved to another location. During two-way synchronization, the deleted source messages will be moved to the source folder corresponding to the target folder where the messages were moved. During one-way synchronization, only the target messages will be moved. N/A
Suppose a source public folder is modified and the source agent creates a PST file including these modifications, and then the corresponding target folder is also modified. During two-way synchronization, the modifications made on the source folder will be applied to the target folder, and the modifications made on the target folder will be applied to the source folder. During one-way synchronization, the modifications made on the source folder will be applied to the target folder, and the agent will consider the folders to be in sync. N/A
During two-way synchronization, the simultaneous move of source and corresponding target messages in public folders will cause duplication of the messages in both the source and target. During one-way synchronization, the messages will be duplicated on the target only. N/A
During two-way synchronization, if some messages or folders have been copied to the target folder and then deleted from the target folder before the Public Folders Source Agent installed on the target server processed them, the deletion will not be synchronized back to the source folder. N/A
The agents synchronize only the folders for which they have a local replica. The root folder you specify for a public folder synchronization job and all its subfolders should be replicated to the agent's server. N/A
If a public folder being synchronized by Migration Manager agents is replicated to other Exchange servers within the same organization, folder design conflicts will be generated when the folder's properties are modified on the target server and on a server with the folder replica. N/A
The Administrator mailbox selected for the public folder synchronization job should be homed on the same server where the public information store is located. This public information store should be associated with the private information store where the Administrator mailbox resides. The setting can be verified in the properties of the Private Information Store. N/A
If the synchronization root folder is created by the public folder agents, there must be a local replica of the folder's parent folder on the agent's server. Otherwise the folder created by the agents will be invalid and may be inaccessible. N/A
If the Public Folders Target Agent performs several attempts to process the PST file (the number of attempts is specified in the agent's Properties dialog box), and during this time a new PST file has been created and received by the agent, the new data contained in the new PST file may be overwritten by the old data contained in the old PST file. N/A
If an Administrator mailbox selected for the public folder job is changed, the agents will perform full resynchronization of all collections added to the public folder job. N/A
If the ‘Keep deleted items for (days)…’ check box and/or ‘Do not permanently delete items until the store has been backup’ check box are selected for the target public information store, the messages deleted on the source server will be put to the SoftDeletes container of the target public folder and will be kept there for the time interval specified in the check box or until the store has been backed up. N/A
If a full resynchronization was performed, the new permissions applied to the public folder which is a synchronization root will not be synchronized back to the source synchronization root folder. N/A
Source and target mail-enabled public folders will have different e-mail addresses. N/A
If the ‘Hide from address book’ check box is cleared during either the first synchronization or a permissions full resynchronization of the mail-enabled public folders, the following warning will be logged by the agent: ‘Warning: 2147024891 You do not have sufficient permission to perform this operation on this object. - MAPI_E_NO_ACCESS’. Also the same warning will be displayed, if Global Catalog server does not exist in the domain in which Exchange server is located. ST62393
If a source public folder has no local replica on the server involved in synchronization but is included in the collection, its deletion will be synchronized even though the folder cannot be synchronized. That is, the corresponding target public folder will be deleted by the agent. N/A
If a public folder job was set up without excluded folders and synchronized by the agents, further exclusion of any subfolders will not prevent the agents from synchronizing the deletion of the excluded folders or their subfolders. N/A
When a new synchronization root folder is copied to the target server, the agent’s account will be added to the folder permissions. N/A
If within one parent folder the source public folder is renamed to the public folder name already existing on the target server, this folder renaming will not be synchronized. N/A
During the time interval when a public folder is being processed by the agent, public folder rules will not work. N/A
The Organizational Forms Library is not copied to the target server. N/A
If the ImportPF Error 2060 Public store was not found on the current server message appears in the Public Folder Target Agent log file, check whether the administrative mailbox specified for the public folder synchronization job is associated with public store on the same Exchange server. ST36480
Free/Busy Synchronization
If the Public Store is dismounted, the Free/Busy Synchronization Agent will not synchronize free/busy messages. N/A
Calendar Synchronization
The Calendar Synchronization Agent (CSA) and the Mail Source Agent (MSA) skip changes of the Calendar folder type. ST65617
If you had Daylight saving time (DST) rules changed in your organization, appointments created during the extended DST period and not processed according to Microsoft recommendations may have incorrect free/busy information after synchronization. For more information, see the Microsoft KB article available at http://support.microsoft.com/kb/941018. ST48000
Calendaring agent may fail when processing mailboxes synchronized by the Calendar Synchronization Agent. Error message will appear in the Event log. ST31857
Microsoft Windows Data Execution Prevention may stop Calendar Synchronization Agent. To avoid this issue, add the Migration Manager for Exchange Calendar Synchronization Agent executable (EMWCSA.exe) to the Windows Data Execution Prevention (DEP) exception list. ST46579
If the users of Exchange 200x organizations schedule resource request appointments between the sessions of the Calendar Synchronization Agent, the Exchange 200x resource mailboxes will accept the appointments. The Calendar Synchronization Agent will then synchronize these appointments. Thus, appointments created in different environments may result in different resource request items in the resource mailbox's schedule. If the “Automatic decline conflict message request” option is selected, Exchange Server deletes one of such items when the users try to modify these appointments. The Calendar Synchronization Agent will synchronize such a deletion and the item will be lost. N/A
Do not delete the Calendar folder copied by the Calendar Synchronization Agent. Once deleted, the folder cannot be restored due to the tombstone created by Exchange Server. N/A
If a mailbox is moved to a new information store by the Calendar Synchronization Agent, the agent may start synchronizing calendar appointments to the mailbox in the old information store. When the user logs on to the target mailbox, he or she will not see the appointments. The appointments will be later synchronized by the agent to the new mailbox. The mailbox in the old store will be marked as reconnected and assigned to both the old and the new information stores. This mailbox cannot be purged. N/A
If the 'All mailboxes' collection is enabled, calendar synchronization may not work properly for this collection. The workaround is to restart the Calendar Synchronization Agent. N/A
If calendar synchronization is performed from Exchange 2007 to Exchange 2007, the Free/Busy time, subject, location permission level is copied as the Free/Busy time permission level. ST51152
After the calendar synchronization, some mailboxes may contain duplicate calendar folders and/or calendar items may appear as messages rather than appointments. For more information about this issue and its resolution, please refer to the SOL42312 and SOL76909 Quest SupportLink Solutions. ST79687
If a user’s Outlook profile is configured to deliver mail to an Outlook data file, then the free/busy status is not synchronized for that user during calendar synchronization. For details about the causes and possible workarounds, see Microsoft KB article 981540. TF225260
Public Folder Rules Synchronization
The Forward to public folder rules are not synchronized correctly, if the corresponding target folder is not mail-enabled. ST36268, ST36272
Source public folder rules that forward mail to an address of a synchronized source object do not work after the migration. ST34325
If any link in a rule's conditions (such as 'From:' or 'Sent to:' field) is set up for a source object that cannot be matched to a target object, the source object's distinguished name or e-mail address will be displayed in the rule after synchronization. N/A
If the rule contains a non-resolved name (for example, if the 'From' field was manually populated without checking names), that name will be copied to the target mailbox as simple text. N/A
When copying public folder rules with templates, the agents may fail with a MAPI_E_NO_ACCESS error, caused by the Exchange 200x server behavior. N/A
Migration Manager agents may fail to copy some of the rules for an Inbox or a public folder if the 32 KB "packed data" limit for those rules is exceeded. For more information, please see the Microsoft article at t http://support.microsoft.com/default.aspx?scid=kb;EN-US;q241325. N/A
If a public folder is moderated, two rules are automatically set up for a folder. If any one of the source folder’s rules cannot be copied (for example, if the moderator’s mailbox cannot be matched to a target user), the 'Moderated folder' settings of the corresponding target folder will not be valid. N/A
In order that the "Reply with template" rule is correctly synchronized for a moderated public folder, the corresponding target folder should be mail-enabled, the rules should be synchronized, and after that the source folder rules and the associated contents should be cleaned using the Cleanup Wizard. N/A
If all rules specified for a source public folder are deleted, and full resynchronization is initiated before the public folder synchronization agents process that folder, the rules will not be deleted from the target public folder. N/A
It is not recommended to set two-way public folder rule synchronization. Instead it is recommended to select the Copy rules check box for the Public Folder Source Agent running on the source server and for the Public Folder Target Agent running on the target server. Note that this recommendation applies only if the synchronized source and target Exchange versions are not the same. N/A
Collection Processing
If a public folder synchronization collection is disabled or deleted before the Public Folder Target Agent processes all PUB files for that collection, data from these PUB files can be replicated back to the source server. N/A
Mail and Calendar agents: If a mailbox is explicitly added to a collection and the collection is disabled, the mailbox will be skipped during processing of all other collections in which this mailbox is also a member, no matter if the collection is enabled or disabled. N/A
In migrations from Exchange 2010, the membership of groups added to collections may not be resolved correctly. This is because Migration Manager looks at the homeMTA attribute of the group members, and that attribute can vary across the group in Exchange 2010 environments. To work around this issue, consider adding members to collections without using groups. TF221280
Migration Manager for Exchange does not prevent inclusion of the same users in mailbox synchronization collections and native move collections. Including the same users in both types of collections will cause both migration types to fail and is strongly discouraged. TF225747
You cannot process the same mailbox at the same time within the collections of different types such as collection for the Office 365 mailbox migration job and collection for the native move job. The mailbox will be processed only for the collection that is first added to the migration. For other collections this mailbox will be skipped. TF227876
Full Resynchronization
Deletions of permissions and messages that occur during full resynchronization may be not synchronized. N/A
If any messages or folders were deleted from the target server, full resynchronization will not restore these deleted items on the target server until Microsoft Exchange cleans the tombstone objects. For more information on full resynchronization, please refer to the appropriate Quest Migration Manager documentation. N/A
Calendar re-synchronization cannot be performed for the switched mailboxes in two-way calendar synchronization job. N/A
Folder deletions during mailbox and public folder synchronization are not synchronized during full resynchronization. This behavior is by design. N/A
Permission Copying
If permissions are simultaneously changed for the source and target folders, the permissions may not be synchronized properly. N/A
Processing the Remote Users Collections
If a mailbox is moved in the target organization using native Exchange management tools while the mailbox is being processed in a Remote Users Collection, the Mail Source Agent will not be able to copy the contents of the source mailbox to the target mailbox. ST36322
Mail Source Agent may experience errors when trying to copy a mailbox from a Remote Users Collection. The error is resolved automatically in the next session. ST30065
If a mailbox is added both to a Remote Users Collection and a Calendar collection, it may not be processed in the Remote Users Collection. ST33232
It is strongly recommended not to stop the MSA while it is processing a mailbox within a Remote Users Collection. N/A
If you decide to stop migrating a mailbox after it has been added to a Remote Users Collection and the Mail Source Agent has started processing it, has removed it, but has not yet recreated it, you will not be able to log on to the corresponding target mailbox nor to move the mailbox. To recreate this mailbox, you will have to first remove it using Exchange Tasks and then perform a full directory resynchronization. N/A
If a mailbox was switched within a Remote Users Collection, and some of its messages were copied from the target mailbox to the source mailbox by the Calendar Synchronization Agent, and the user synchronized these messages to the OST file before the mailbox profile was updated by EMWProf, then these messages may become conflict messages after EMWprof updates the profile. N/A
Mailboxes that have been migrated within a Remote Users Collection should never be included in ordinary mailbox collections. Otherwise, when a full resynchronization is performed for an ordinary collection that includes such a mailbox, all messages created by the user when working offline and copied by the mail agents from the source mailbox to the target mailbox will become conflict messages after the target mailbox has been synchronized with the OST file. N/A
If a source mailbox message was modified when working both online and offline, it will become a conflict message after the mailbox has been copied to the target within the Remote Users Collection and modified in the target mailbox when working online. The issue relates to Exchange 2000 mailboxes only. N/A
If a mailbox was switched within a Remote Users Collection, its profile was updated by EMWProf, it was synchronized with the OST, the switch was undone for this collection, and the Remote Users Collection was synchronized by the Mail Source Agent again, then the messages modified in the target mailbox by the last copying will become conflict messages after mailbox synchronization with OST. N/A
If the corresponding target mailbox exists for a source mailbox included in a Remote Users Collection, the target mailbox will be removed with all its contents when the Mail Source Agent processes the collection. N/A
Favorites are not preserved for the target mailbox. If a remote user works offline, Favorites may still be present. However, as soon as the user synchronizes OST with his or her mailbox, the Favorites will be lost. N/A
Users will not be able to use Microsoft Outlook to log on to their mailboxes while the Mail Source Agent is processing them within a Remote Users Collection. If a user is working online, Microsoft Outlook will not operate while the mailbox is being processed. After mailbox processing has been completed, a user must log off and log back on to the mailbox. N/A
The schedule set for the Mail Source Agent will not be enforced if the agent has begun processing a mailbox within a Remote Users Collection. For example, if the agent was scheduled not to work from 1 am through 6 am and at 1 am the agent is processing a mailbox, it will not stop until the mailbox processing completes. N/A
It is recommended that the target mailbox size limit be greater than the source mailbox size limit. Otherwise, the MSA will repeatedly attempt to copy the source mailbox to the target server when migrating a mailbox within a Remote Users Collection. If the mailbox size limit has been exceeded, the mailbox will not be copied to the target server. N/A
The Offline Address Books and folder properties are not preserved in the OST file when a mailbox is migrated within a Remote Users Collection. N/A
The target Exchange server application event log will log an error when a Remote Users Collection mailbox is copied to the target server. N/A
If a mailbox was switched within a Remote Users Collection and then you need to undo the switch for that mailbox and switch it again, you can do so only using Remote Users Collection. The mailbox profile will not be updated if you switch this mailbox within a regular collection. N/A
If the Mailbox Migration Administrator Mailbox specified for particular Exchange server is located on other Exchange server, then Remote Users Collection mailboxes will be processed incorrectly: mailboxes will be switched without content copied successfully from source to target Exchange server. The following error will appear in the Mail Source Agent log file: CSession::OpenMailbox Error -2147221233 File: 'aeMAPISession.cpp' Line: '496'.
To work around the issue, specify correctly Mailbox Migration Administrator Mailbox for Exchange server you work with and perform the Undo Switch operation from the Migration Manager console for affected mailboxes.
ST64055
Using Agent Hosts
If two Exchange servers use the same agent host, you cannot set separate switch notification for each Exchange server. ST65216
If you set up an agent host server for an Exchange 2007 CCR Cluster server for the first time, all configuration data related to synchronization jobs will be deleted from the configuration databases located on the active cluster node only. After that the agent must be started and changes of configuration data related to synchronization jobs must be replicated successfully to the passive node as well to avoid processing of synchronization jobs using obsolete configuration data in case of unexpected failover. ST60745
If during two-way public folders synchronization either of the following changes related to agent hosts associated with the Exchange servers are made:
  • The same host server is configured for both source and target Exchange servers
  • Source and target Exchange servers associated before with the same host server, are configured not to use this host server as common
then Public Folder Target Agent may process the PUB files with the PSTFile::Receive Error 1617 PST file 'C:\WINDOWS\system32\Aelita Exchange Migration Wizard\Mail Transmission Agent\In\ES01\AD0B005AF9C3EB4F8A5377CC681C174B.PUB' was not found error displayed in the log file, because such files were created before configuration changes described above. To workaround the issue, delete these PUB files manually and perform resynchronization if needed.
ST63513
Migration to Microsoft Office 365
If you change the SQL Server database for a project that migrates mailboxes to Microsoft Office 365, previously migrated mailboxes will have duplicate contents. TF218957
During calendar synchronization between Exchange 2010 and Microsoft Office 365, after a user has switched to Office 365, if an item with an attachment appears in the Office 365 calendar and the attachment is a message or another Outlook item, then the calendar item is not replicated to the Exchange 2010 calendar. TF226322
If at least one Migration Agent for Exchange instance is already installed on the agent host specified while adding new Office 365 calendar synchronization or mailbox migration jobs, its installation path will be used instead of the path specified in the wizard. Also in that case a default installation path may be displayed instead of the actual one on the Set Up Migration Agent for Exchange step. TF216442
During calendar synchronization with Microsoft Office 365, the "Free/busy time, subject, location" and "Free/busy time" permissions are not synchronized for default calendars. This is because modifying those permissions is not permitted by Microsoft policy for all tools except Microsoft Outlook 2007/2010. TF225099
In Microsoft Windows 2008, the Migration Agent for Exchange cannot connect to Microsoft Office 365 if your web browser automatically detects proxy settings. In this case, the following error arises: "The Proxy Auto-configuration URL was not found. For more information, see the about_Remote_Troubleshooting Help topic."
To resolve this problem, you should log on under the agent account and explicitly specify the proxy settings for your browser.
TF229450
Native New-MoveRequest Migration
You cannot manually suspend a mailbox move request created by the Migration Agent for Exchange. In this case, the agent resumes the move request. To stop this erroneous behavior, you should disable the collection that includes this mailbox and then repeat the suspend operation. TF230889
When you perform a native mailbox move operation, you may get the "MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)" error message. In this case, the move operation shows the "Queued" status but it is completed successfully.
To check the actual status of the move request, you should retry the operation.
TF229842
To improve the migration stability, it is recommended to use only one instance of Migration Agent for Exchange per agent host for performing a native move. TF232318
If you use more than one instance of Migration Agent for Exchange per agent host for performing a native move, you may get the following error: "Connecting to remote server failed with the following error message : The WS-Management service cannot process the request. This user is allowed a maximum number of 5 concurrent shells, which has been exceeded. Close existing shells or raise the quota for this user."
To resolve this problem, you should increase the maximum number of concurrent PowerShell connections to a single Exchange server. For details, go to http://msdn.microsoft.com/en-us/library/windows/desktop/ee309367(v=vs.85).aspx.
TF231503

 


Third Party Known Issues

The following is a list of third party issues known to exist at the time of Migration Manager 8.9 release.

Feature Known Issue Defect ID
General
When you try to connect to a mailbox on an Exchange Server 2010 server from an Exchange Server 2003 server, a "MAPI_E_FAILONEPROVIDER" error message may occur. For details, see Microsoft KB article 983555. ST65157

 


Upgrade and Compatibility

Migration Manager 8.9 supports upgrading from the following versions:

For upgrade information refer to the Quest Migration Manager Upgrade Guide available on this CD.

Note: Migration Manager for Exchange must not be installed in the same environment as Quest Exchange Migration Wizard 3.x or 4.x.

 


System Requirements

Before installing Migration Manager, ensure your system meets the minimum hardware and software requirements listed in the Migration Manager System Requirements and Access Rights HTML document.

 


Global Operations

This section contains information about installing and operating this product in non-English configurations, such as those needed by customers outside of North America. This section does not replace the materials about supported platforms and configurations found elsewhere in the product documentation.

This release is Unicode-enabled and supports any character set. In this release, all product components should be configured to use the same or compatible character encodings and should be installed to use the same locale and regional options. This release is targeted to support operations in the following regions: North America, Western Europe and Latin America, Central and Eastern Europe, Far-East Asia, Japan.

 


Getting Started

Contents of the Release Package

The Migration Manager CD contains the following:

  1. Migration Manager 8.9
  2. Directory Synchronization Agent 8.9
  3. Migration Manager Statistics 8.9
  4. Client Profile Updating Utility 5.1
  5. Migration Manager Resource Kit 8.9
  6. Migration Manager for Exchange Resource Kit 8.9
  7. Migration Manager for Active Directory (Microsoft Office 365) Console 8.9
  8. Product Documentation, including:
  9. Redistributables, including:

Installation Instructions

It is strongly recommended that you read the Release Notes, Quest Migration Manager System Requirements and Access Rights, and Quest Migration Manager Installation Guide before installing products from this CD.


For More Information

Contacting Quest Software:

Email info@quest.com
Mail Quest Software, Inc.
World Headquarters
5 Polaris Way
Aliso Viejo, CA 92656
USA
Web site http://www.quest.com

Please refer to our Web site for regional and international office information.

Contacting Quest Support:

Quest Support is available to customers who have a trial version of a Quest product or who have purchased a Quest product and have a valid maintenance contract. Quest Support provides unlimited 24x7 access to our Support Portal at www.quest.com/support.

From our Support Portal, you can do the following:

View the Global Support Guide for a detailed explanation of support programs, online services, contact information, and policy and procedures. The guide is available at: www.quest.com/support.

 


 

© 2012 Quest Software, Inc.

ALL RIGHTS RESERVED.

 

This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use without the written permission of Quest Software, Inc.

If you have any questions regarding your potential use of this material, contact:

Email legal@quest.com
Mail Quest Software World Headquarters
LEGAL Dept
5 Polaris Way
Aliso Viejo, CA 92656
Web http://www.quest.com

Refer to our Web site for regional and international office information.

 

Trademarks

Quest, Quest Software, the Quest Software logo are trademarks and registered trademarks of Quest Software, Inc in the United States of America and other countries. For a complete list of Quest Software's trademarks, please see http://www.quest.com/legal/trademark-information.aspx. Other trademarks and registered trademarks are property of their respective owners.

 

Third Party Contributions

Quest® Migration Manager version 8.9 contains some third party components (listed below).

Copies of their licenses may be found at http://www.quest.com/legal/third-party-licenses.aspx .

Component License or Acknowledgement
Boost 1.34.1 Boost 1.0
Boost 1.46.1 Boost 1.0
HTMLayout 1.0 This Application (or Component) uses HTMLayout Component, copyright Terra Informatica Software, Inc. (http://terrainformatica.com).
Loki 0.1.4 MIT
Loki 0.1.6 MIT
NABU-library 1.0* GNU LGPL Version 3, 29 June 2007
Newtonsoft.Json.dll 3.5.0.0 MIT
ZLib 1.1.4 zlib 1.2.3
zlib 1.2.7 Portions copyright 1995-2012 Jean-loup Gailly and Mark Adler
TinyXml 2.2.1 This product contains portions of the PAWN scripting software (formerly known as SMALL).

* a copy of the source code for these components is available at http://rc.quest.com .

Boost 1.34.1: License Text

Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Boost 1.46.1: License Text

Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Loki 0.1.4: License Text

Copyright (c)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Loki 0.1.6: License Text

Copyright (c)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

NABU-library 1.0: License Text

GNU LESSER GENERAL PUBLIC LICENSE Version 3, 29 June 2007

Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

This version of the GNU Lesser General Public License incorporates the terms and conditions of version 3 of the GNU General Public License, supplemented by the additional permissions listed below.

0. Additional Definitions.

As used herein, "this License" refers to version 3 of the GNU Lesser General Public License, and the "GNU GPL" refers to version 3 of the GNU General Public License.

"The Library" refers to a covered work governed by this License, other than an Application or a Combined Work as defined below.

An "Application" is any work that makes use of an interface provided by the Library, but which is not otherwise based on the Library. Defining a subclass of a class defined by the Library is deemed a mode of using an interface provided by the Library.

A "Combined Work" is a work produced by combining or linking an Application with the Library. The particular version of the Library with which the Combined Work was made is also called the "Linked Version".

The "Minimal Corresponding Source" for a Combined Work means the Corresponding Source for the Combined Work, excluding any source code for portions of the Combined Work that, considered in isolation, are based on the Application, and not on the Linked Version.

The "Corresponding Application Code" for a Combined Work means the object code and/or source code for the Application, including any data and utility programs needed for reproducing the Combined Work from the Application, but excluding the System Libraries of the Combined Work.

1. Exception to Section 3 of the GNU GPL.

You may convey a covered work under sections 3 and 4 of this License without being bound by section 3 of the GNU GPL.

2. Conveying Modified Versions.

If you modify a copy of the Library, and, in your modifications, a facility refers to a function or data to be supplied by an Application that uses the facility (other than as an argument passed when the facility is invoked), then you may convey a copy of the modified version:

a) under this License, provided that you make a good faith effort to ensure that, in the event an Application does not supply the function or data, the facility still operates, and performs whatever part of its purpose remains meaningful, or

b) under the GNU GPL, with none of the additional permissions of this License applicable to that copy.

3. Object Code Incorporating Material from Library Header Files.

The object code form of an Application may incorporate material from a header file that is part of the Library. You may convey such object code under terms of your choice, provided that, if the incorporated material is not limited to numerical parameters, data structure layouts and accessors, or small macros, inline functions and templates (ten or fewer lines in length), you do both of the following:

a) Give prominent notice with each copy of the object code that the Library is used in it and that the Library and its use are covered by this License.

b) Accompany the object code with a copy of the GNU GPL and this license document.

4. Combined Works.

You may convey a Combined Work under terms of your choice that, taken together, effectively do not restrict modification of the portions of the Library contained in the Combined Work and reverse engineering for debugging such modifications, if you also do each of the following:

a) Give prominent notice with each copy of the Combined Work that the Library is used in it and that the Library and its use are covered by this License.

b) Accompany the Combined Work with a copy of the GNU GPL and this license document.

c) For a Combined Work that displays copyright notices during execution, include the copyright notice for the Library among these notices, as well as a reference directing the user to the copies of the GNU GPL and this license document.

d) Do one of the following:

0) Convey the Minimal Corresponding Source under the terms of this License, and the Corresponding Application Code in a form suitable for, and under terms that permit, the user to recombine or relink the Application with a modified version of the Linked Version to produce a modified Combined Work, in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.

1) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (a) uses at run time a copy of the Library already present on the user's computer system, and (b) will operate properly with a modified version of the Library that is interface-compatible with the Linked Version.

e) Provide Installation Information, but only if you would otherwise be required to provide such information under section 6 of the GNU GPL, and only to the extent that such information is necessary to install and execute a modified version of the Combined Work produced by recombining or relinking the Application with a modified version of the Linked Version. (If you use option 4d0, the Installation Information must accompany the Minimal Corresponding Source and Corresponding Application Code. If you use option 4d1, you must provide the Installation Information in the manner specified by section 6 of the GNU GPL for conveying Corresponding Source.)

5. Combined Libraries.

You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities that are not Applications and are not covered by this License, and convey such a combined library under terms of your choice, if you do both of the following:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities, conveyed under the terms of this License.

b) Give prominent notice with the combined library that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.

6. Revised Versions of the GNU Lesser General Public License.

The Free Software Foundation may publish revised and/or new versions of the GNU Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library as you received it specifies that a certain numbered version of the GNU Lesser General Public License "or any later version" applies to it, you have the option of following the terms and conditions either of that published version or of any later version published by the Free Software Foundation. If the Library as you received it does not specify a version number of the GNU Lesser General Public License, you may choose any version of the GNU Lesser General Public License ever published by the Free Software Foundation.

If the Library as you received it specifies that a proxy can decide whether future versions of the GNU Lesser General Public License shall apply, that proxy's public statement of acceptance of any version is permanent authorization for you to choose that version for the Library.

Newtonsoft.Json.dll 3.5.0.0: License Text

Copyright (c)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

ZLib 1.1.4: License Text

License

/* zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.3, July 18th, 2005

Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly jloup@gzip.org
Mark Adler madler@alumni.caltech.edu

*/

 

Disclaimer

The information in this document is provided in connection with Quest products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Quest products. EXCEPT AS SET FORTH IN QUEST'S TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, QUEST ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL QUEST BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF QUEST HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Quest makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Quest does not make any commitment to update the information contained in this document.